How To Fix Error Code 0x80004005 Windows 10/11

Error code 0x80004005 usually occurs when there is a problem accessing a shared folder or drive, using a specific application, or installing Windows updates. This article covers complete troubleshooting of unspent Windows error code 0x80004005

What is Error Code 0x80004005?

Network sharing services allow you to transfer files between different computers within the network. The same is true for Windows computers on the network. You can share files between different Windows 10/11 computers on the same network. However, the process is not smooth. During file sharing, you may encounter an unspecified error 0x80004005.

Windows users experienced the unspecified error 0x80004005 while accessing shared folders, virtual machines, and even during Windows updates. Now, before you see how to fix error code 0x80004005 in Windows 10/11 in all cases, you need to understand what causes this error in the first place.
Read also: How to Fix Windows 10 Error Code 0xc00000e Without Losing Data.

Causes of error code 0x80004005

That error code 0x80004005 enters Windows 10/11 when you are most likely to share files or updates with Windows. Although a mistake may indicate an unspecified error, a variety of factors have contributed to the error in the first place.

Below is a general list of causes of error code 0x80004005 for Windows:

• File system problems: There are different file systems for different operating systems. Due to a file system problem, if you are trying to rename or edit a folder, you should face error code 0x80004005.
• Windows Updates: When new files are downloaded and installed, you may also experience 0x80004005 error during Windows updates.
• Viruses and malware: Computer viruses can also damage your computer. Thanks to them, you may also face 0x80004005 error code in Windows.
• Policy problems: If your computer has certain policies disabled, it may prevent you from using file sharing on the network. As a result, you get the error code 0x80004005 while performing any file sharing action.

These are some of the most common causes of 0x80004005 Windows 10/11 error. But, do not worry, as you can fix this by reading the next section of this article.

How To Fix Error Code 0x80004005 in Every Way

Unspecified error code 0x80004005 on Windows may appear for a variety of reasons. The main causes are listed in the previous section. There are other solutions to remove this error in different situations.
Therefore, this section will see eight step-by-step solutions that can fix error code 0x80004005 within Windows 10/11 in all cases. So, without wasting time, let’s look at each of them.

Fix 1.Run the Windows Update Troubleshooter

Windows update issues are one of the most common causes of this error. As a result, the first thing you should do is use a Windows troubleshooter to troubleshoot updates.

Follow the steps below to use the Windows Update Troubleshooter:

Step 1. Open Settings by going to Start and looking for “Settings”.
Step 2. Go to Update & Security and click “Troubleshoot”. Launch Debugger.

Step 3. Restart your computer.

Hopefully, after restarting your computer, you will be able to fix error code 0x80004005.

Fix 2. Upgrade Windows Update to Latest Version

Starting the Windows update is another quick way to fix error code 0x80004005. Also, it is highly recommended to have the latest version of Windows in any situation.

Follow the steps below to upgrade to the latest Windows version:

Step 1. Open Settings by going to Start and looking for “Settings“.
Step 2. Go to “Update & Security” and click “Windows Update“.
Step 3. Click the “Check for Updates” button and install the latest updates.

Fix 3. Fix Corrupted System Files

File system or file registration errors can cause problems with Windows updates. If so, you need to repair the corrupted system files.
Follow the steps below to repair your corrupted system files and fix error code 0x80004005:
Step 1. Open and use CMD as administrator.

Step 2. In CMD, type the command sfc / scannow and hit enter.

Step 3. After executing the command, SFC will edit the system files.
Wait until the SFC does the work for you. When done, restart your computer and check that you are still facing error code 0x80004005.

Fix 4. Disable Temporary Antivirus Software

When transferring files through shared folders, the biggest obstacle can be your virus protection or firewall. They prevent you from copying or sharing files from unknown sources.
Therefore, if you are experiencing an unspecified 0x80004005 error code Windows 10/11, try temporarily disabling your antivirus software. If that fixes an error, it means your antivirus was creating an error.

Fix 5. Use Regedit to Create a LocalAccountTokenFilterPolicy Value

Creating a LocalAccountTokenFilterPolicy can help you enable administrative sharing rights. These rights are automatically disabled and this is why they cause the error code 0x80004005.
Follow the steps below to use Regedit to create a LocalAccountTokenFilterPolicy value:
Step 1. Open the Run window by pressing the Windows + R key.
Step 2. In the Run window, type regedit and press the key Ctrl + Shift + Enter.
Step 3. Navigate to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Policies \ System.
Step 4. You will see WMI Control. Right-click on it and access its features.
Step 5. In the features, add “DWORD” and name it “LocalAccountTokenFilterPolicy “.

Step 6. Set the “LocalAccountTokenFilterPolicy ” value to 1.

After that, save and apply your changes, and you will be able to share files between network groups without error code 0x80004005.

Fix 6. Use Another File Extractor

Windows 10/11 users have reported another important case where they have seen an unspecified 0x80004005 error code while extracting compressed files.
Multiple file products are available, such as WinRAR, 7zip, WinZip, etc. If you are facing any problem with one file lock, it is always a good way to try another and see if you still have a problem.

Fix 7. Re-register jscript.dll and vbscript.dll

There are two important file files on your Windows computer. They are called javascript.dll and vbscript.dll. Users also corrected the error code 0x80004005 by re-registering these files.
So, see the steps below to re-register jscript.dll and vbscript.dll for Windows 10/11 using cmd:
Step 1. Open CMD. You can open CMD by pressing the Windows + R key to open the Run window and type CMD inside it.
Step 2. Type the command regsvr32 vbscript.dll and then install to re-register vbscript.dll.

Step 3. Type the command regsvr32 jscript.dll and install to re-register jscript.dll.

When you are done, restart your system, and hopefully, the problem will no longer exist.

Fix 8. Disable New Mail Notification

The new Microsoft Outlook mail notification also causes error code 0x80004005. Disabling it can help you clear the error.
Follow the steps below to disable new mail notification:
Step 1. Open Microsoft Outlook.
Step 2. Go to “File> Options”.
Step 3. From there, click on “Outlook Options“.
Step 4. Uncheck the option in the arrival section of the message “Show Desktop Notification“.
Step 5. Click the “OK” button to save the settings.

Conclusion

Unspecified error code Windows 0x80004005 has been a source of concern for many of its users. Unfortunately, especially in Windows 10/11, there are a number of situations where you have to deal with this error code.
Other common situations are when you are trying to share, copy, or edit files between networks. Users also face an issue with error code 0x80004005 during Windows updates, access to virtual machines, and running applications.
However, you can correct the 0x80004005 unspecified error code in Windows by following the eight steps outlined in our article. One thing to keep in mind is that you always have the updated Windows version to disable 0x80004005 error code in the first place.

ALSO READ:

The Application Was Unable To Start Correctly 0xC0000142 [Solved]

What is Domain Controller | 5 Benefits of Domain controller | Advantage of Domain Controller |

8 Ways To Fix “Windows Explorer Has Stopped Working” In Windows 11/10/8/7

Error Code 0x80004005 FAQ